ISO Logo
ITAR Small

E-Verify Logo

US Flag

Keep MFG in the U.S.A.
Veteran Owned

twitter youtube linkedIn

Sheet Metal Production

productionIn the fabrication industry, specifically metal fabrication, you are probably in one of three phases: prototype, production, and mass production. All three are treated completely different when manufacturing. Below is an explanation of the production stage and how VIP can cater to your production needs.

Production: This stage may also be known as batch production. This is when your part or product is in its introduction and growth stages. Once prototypes have been validated for the design as far as fit, form, function, and cosmetics and a demand has been established, production is the next stage. This stage of manufacturing consists of batches of parts that range from 50 to the hundreds and usually performed in batches.

This stage of product development is perfect for VIP's capabilities since our shop floor is divided into departments based on our capabilities. Therefore a department will perform fabrication on all the parts and continue to move them to the next department for its next process to be performed on all parts. Since there are several parts involved, the set up costs are much less per part since the set up costs are allocated by all parts making the total cost per part more reasonable than say a prototype.

If you are interested in having us quote quality parts for production, feel free to contact us for a quote by visiting our Request For Quote or RFQ page!


Has your production quantities succeeded and now you're ready to move to the next step??
If you have done prototypes, succeeded at production, and ready to move onto mass production, but want to keep it in the USA, please visit our Mass Production page!


Do you have a new product and need prototypes?
Please visit out Prototype page for more information of how we can assist you.




Back to Top